HPG1900 GONOIPHOTOMETER
System function
It is employed to test the luminous intensity distribution and all kinds of photometry parameters of LED lightings, street light, indoor and outdoor lamps. Measured parameters including luminous intensity distribution curve, arbitrary cross-section of the luminous distribution curve, isocandela distribution curve, bright limit curve, zonal luminous flux, luminaires efficiency, glare, total luminous intensity, efficiency luminous flux, utilization factor, electricity parameters (power, power factor, voltage, current) and etc.
![](/manage/ewebeditor/uploadfile/20110704091353298.jpg)
HPG1900 characteristics:
1.Principle to meet the CIE 70, CIE 121 and relevant Chinese standards
2.Test result can output IESNAL file to meet the international standard, and can be regarded as the input data for the international luminaires software directly.
3.Rotation the lamps to achieve B-β, A-α and C-γ test solutions.
4.Compact structure; enable drive by two columns or single column which is more convenient to fix all kinds of luminaires like Grille, down light, flood light and etc.
5.Special double laser aiming device for the position of the luminaires.
6.The data can meet the requirements of international standard format and can be used by other luminaires application software.
7.High precise and sensitive detector; V(λ )strictly correct.
8.RS-232-C interface to connect with PC conveniently. Chinese-English Windows operation interface.
9.Hand-held remote controller which is ease for two-axis rotation.
Specifications:
1.Accuracy of photodetector: class1
2.Measurement range of Illumination: 0.001Lx to 1×105 Lx
3. Accuracy of angle: 0.10
4.Lamps can rotate around the vertical axis range: 180°~180°or 0°~360°
5.Lamps can rotate around the horizontal axis range: -180°~180°or 0°~360°
6.Measurement accuracy of electricity parameters: class 0.5
7.The maximum size of measured lamps:
1) power: 2KVA 2)weight: 50kg 3)dimension;1200×800mm
8.Measure distance: 10m to 30m (it depend on the size of the lab)
HPG1900 test Principle:
Fix the detector and then rotation the lamps to reach measurement principle. The lamps are fixed in the two-columns working table, and then glow center of the lamps and rotation center of the working table should coincident by the laser aiming device. When the lamps rotate around the vertical axis, luminous intensity data of horizontal directions can be obtained; when the lamps rotate around the horizontal axis, luminous intensity data of vertical directions can be obtained. Both vertical and horizontal axis can continued rotate at the range of ±180°or 0°~360°. According to the lamps measure requirements, the system can achieve B-β、A-α or C-γ solutions. After luminous intensity data of all directions have been obtained, other photometry parameters can be work out by PC. In order to ensure the lamps are stable fixed, the system can be applied by two structures according to difference test solutions. The details as following:
1.Double columns structure (B-β and A-α solutions)
It is use to test Grille lamps and etc. when fix the lamps, make sure the glare center of lamps and rotation center of working stable are coincident. In B-β coordinate system, lamps axis and horizontal axis of working table should coincident. In A-α coordinate system, lamps axis and horizontal axis of working table should coincident. Shown in Figure 2-1
2.Single column structure (C-γ solution and Conical coordinate system)
They are used to test downlight, spotlight and etc. when fix the lamps; make sure the glare center of lamps and rotation center of working stable are coincident.
![](/manage/ewebeditor/uploadfile/20110704091611501.jpg)
![](/manage/ewebeditor/uploadfile/20110704091635700.jpg)
Figure 2-1 Double columns test principle Figure 2-2 single column test principle
Lab Requirement:
1. Room requirements (minimum size)
A.Dark room for the test rotation working table and photodetector
B.Dimension: height 2.5m, width: 3m, length: 6m-30m
C. Wall: all interior walls, ceilings, floors should paint matte black
2. Working room for controller cabinet, PC and printer dimension: no less than 3m×3m
A.Environment conditions:
Put a set of air-condition into the dark room to control ambient temperature to meet the IEC requirements.
3.PC system
A computer with Windows operation system and two RS-232 interface, a printer.
2. HP104 Digital Power Meter (AC/DC Model)
CHARACTERISTICS AND SPECIFICATIONS:
1. 4windows display: V, A, PF, Hz;
2. All measurements are effective
3. Range of voltage: AC 75V/150V/300V/600V; DC 35V/75V/150V/300V
4. Range of current: AC 0.5A/2A/8A/20A; DC 0.3A/1.2A/5A/20A
5. PF: -1.000~1.000;
6.RS-232- C interface
7. Auto zero adjustment;
8. Hz: 45Hz-130Hz; band: 5 KHz
9. Accuracy: class 0.5.
Fig:
![](/manage/ewebeditor/uploadfile/20110704091907547.jpg)
3. THP500 AC Power source
Test Power Supply is a precise pure sine wave supply with 50/60Hz frequency and high power, high stability, low distortion. As an ideal standard AC power supply for harmonic test, it is particularly suitable to test electronic ballast, energy-saving lamp, television and other low power appliance. It meets the requirement of the standard of IEC1000-3-2, IEC555-2, IEC929, IEC969 and etc.
Specifications
(1)Frequency display: 4-digit LED display, accuracy±0.05Hz
(2)Output voltage range: 0 to 150V (maximum current 4.2A)
0 to 300V (maximum current 2.1A)
(3)Stability of voltage: 0.2% per 30 minutes
(4)Voltage display: class 0.5 accuracy
(5)Total voltage distortion: 0.6% (free or full resistive load)
(6)Equivalent internal resistance: 0.1Ω
(7)Load regulation: 0.1%
(8)Maximum output power: 500VA
(9)Isolate between output and input supply; floating output
(10)Environment temperature: 0 to 35℃
Environment Humidity: 30% to 80%
(11) AC INPUT: 220V/50Hz OR 110V/60Hz
Fig:
![](/manage/ewebeditor/uploadfile/20110704092028727.jpg)
4.Standard Light Source
The temperature and luminous flux of the standard light source are stability and reappearing under the condition of rated current; it is used in color temperature and luminous flux calibration, the measurements enable trace to CIES.
5.19inch standard instrument cabinet
The cabinet can be used with our measure instruments, providing the full-set faceplate which enable to dustproof and against the electromagnetism, that’s catch with the international fashion;
![](/manage/ewebeditor/uploadfile/20110704092125877.jpg)
6. Software
Free of charge, both English and Chinese version are available.